| After buying your Husqvarna chainsaw it is important | | | | into any wood you will find it very difficult indeed. |
| that you take proper care of it. If you don't then it could | | | | Secondly, next take a close look at the chain and |
| end up costing you quite a lot to get new Husqvarna | | | | sprocket which are driving the blade. Again it is |
| chainsaw parts to replace those that are damaged. | | | | important that you check this to ensure that the right |
| So before each use of your equipment you should | | | | level of tension is in the chain. If it isn't then the chances |
| thoroughly check it over to make sure that all parts | | | | of it coming off are greatly increased. Plus again it |
| are in good working order. | | | | won't work as effectively as cutting through the wood |
| Below we offer some advice on what you should be | | | | as you would have hoped. |
| looking for when inspecting your Husqvarna chainsaw | | | | Thirdly, before you start the chainsaw up inspect the |
| prior to use. This way not only will you ensure that | | | | motor very carefully. Look for any lose screws or |
| your equipment remains working at its most efficient | | | | fasteners on it. Plus also look to see if there is any |
| levels, but will ensure that the costs to repair it are kept | | | | dust or debris collecting in areas where it shouldn't. |
| low. | | | | Failure to remove this can lead to it getting into the |
| First off inspect the teeth on the saw blade first to | | | | motor and then causing it to stop working as a part |
| make sure that none of these have been damaged or | | | | has broken or the motor has seized. |
| broken. If you don't then as soon as you start to cut | | | | |