| If you take time over caring for your McCulloch | | | | ensure that it moves smoothly and easily as it is pulled |
| chainsaw then you are ensuring that it won't let you | | | | through the wood. Plus before every use check that |
| down when it is needed most. Plus through proper | | | | the chain is tight along with any screws or fasteners |
| care the cost of replacing many of the McCulloch | | | | on it. |
| chainsaw parts is reduced. | | | | 2. Another thing one should do after you have used |
| So what does one need to do to ensure that the | | | | your McCulloch chainsaw for more than 10 hours is to |
| chainsaw you have remains in good working condition? | | | | clean out or replace the air filter. Doing this then |
| Below we look at some of the things you can do to | | | | ensures that the equipment uses less fuel as it is |
| care for yours ensuring that it remains in good working | | | | running much cooler. |
| order and so ensuring that it lasts for many years to | | | | 3. Also after you have used the chainsaw for 10 hours |
| come. | | | | then the sprocket which helps to drive the blade must |
| 1. After making 5 to 10 cuts with yours the new chain | | | | be lubricated. If you fail to do so then the sprocket can |
| will begin to stretch so it is a good idea to stop and | | | | become damaged and the chain will then slip off. You |
| readjust it. If the chain becomes loose then the | | | | know that you have correctly lubricated the sprocket |
| chances of it becoming separated from the guide bar | | | | as a small amount of the grease applied will appear on |
| or becoming bound to the wood is increased. By | | | | the edge of the guide bar close to the sprocket. |
| ensuring that your chain is correctly adjusted will | | | | |